Electronic Component BOM and order: Generic Color Sensor Shield

/in /by

Approved By: Muhannad Al Mohamed E&C DM, Charles Banuelos MFG DM

Designing The Color Sensor Shield

Charles Banuelos (MFG DM) and I have worked together to design the Color Sensor shield that would be used by the projects of the Robot Company. I was responsible for designing the schematic part and he was responsible for designing the layout part of the shield. The Shield is using two Color Sensing ICs (BH1745NUC) presented by Thomas Forman. This IC can be adjusted to have two different addresses, which makes I2C communication protocol usable while using two Color sensors.

Color Sensor Shield – Schematic

Color Sensor Shield – PCB layout

Written By: Muhannad Al Mohamed E&C DM

Updated: 11/20/2017

 

Color Sensor Shield Parts list

The parts used in making the Color Sensor Shield are listed below. They were ordered from digikey.com and has arrived. The parts will be used to fabricate and test the color sensor shield on Monday 11/27/2017.

Color Sensor Shield parts

Ordered parts’ Invoice

 

Written By: Muhannad Al Mohamed E&C DM