Muse Laser Cutter Parts Verification & Additional Purchase of Materials
Written By: Charles Banuelos (Design & Manufacturing Division Manager) & Lucas Gutierrez (Project Manager for ModWheels)
Worked on by: Charles Banuelos (Design & Manufacturing Division Manager), Lucas Gutierrez (Project Manager for ModWheels), & Vanessa Enriquez (Design & Manufacturing Engineer for Goliath)
Before the setup of the laser cutter, initial confirmation of all components need to be verified and made sure there were no shipping damage. To verify this, a packing list should be included in the box. To start the verification process, remove and document all components in an orderly fashion, ensuring no loss of components.
For the Muse Laser Cutter, components included:
- Laser cutter (with power cable)
- Instruction manual (Laser cutter manual & software operation manual)
- Product registration
- Warranty registration
- Water cooler (with water hose & pump adapter)
- Exhaust fan (with ducting)
- Air pump (with air hose & air nozzle adapter)
- Burn plate
- Focus billet
- Allen wrench
- Thermal paper
- Ethernet cable
Once parts have been verified and checked for damage, additional parts may need to be purchase in order to ensure proper performance.
For the Muse Laser Cutter, separately purchased parts included:
- Water cooler
- Air filter (with ducting)
- 1/2″ Hose clamps
- 3 Gallons of distilled water
There is a helpful un-boxing video for the Muse laser cutter.
Fall 2017:
An initial unpacking was completed by Prof. Hill. There was a meeting, occurring on Thursday(11/2/2017) at 3pm that verified that all parts of the laser were received. There was extra hose clamps purchased in order to secure all water hoses to the input and output of the coolant system. There was also distilled water purchased in order to run the coolant system properly.
